Sydney Airport Message Board

Sydney Airport Message Board (http://www.yssyforum.net/board/index.php)
-   International Industry (http://www.yssyforum.net/board/forumdisplay.php?f=4)
-   -   Sydney bound A380 kills a CL604 with wake turbulence (http://www.yssyforum.net/board/showthread.php?t=11425)

MarkR 17th March 2017 08:11 AM

Sydney bound A380 kills a CL604 with wake turbulence
 
Very scary report on the effects of wake turbulence:

http://flightservicebureau.org/enrou...4-upside-down/

Quote:

A Challenger 604 at FL350 operating from Male-Abu Dhabi passed an A380 opposite direction at FL360, one thousand feet above, about 630nm southeast of Muscat, Oman, over the Arabian Sea.

A short time later (1-2 minutes) the aircraft encountered wake turbulence sending the aircraft into an uncontrolled roll, turning the aircraft around at least 3 times (possibly even 5 times), both engines flamed out, the aircraft lost about 10,000 feet until the crew was able to recover the aircraft, restart the engines and divert to Muscat. The aircraft received damage beyond repair due to the G-forces, and was written off.

Grahame Hutchison 19th March 2017 11:01 PM

That is very scary stuff

Philip Argy 19th March 2017 11:27 PM

Physics ...
 
I recollect an incident when an a/c on final approach to 34R with even relatively light westerly winds ran into wake vortices from super heavy a/c that landed on 34L moments earlier. It's an issue that ATC rules need to take into account. After this incident I'd be much more likely to ask for vectoring - better to be safe than sorry!

MarkR 22nd March 2017 03:49 PM

Bit of a mess inside.

https://www.facebook.com/flightservi...type=3&theater

Greg Hyde 18th May 2017 10:31 PM

Interim report released

The aircraft manufacturer determined that the Challenger's airframe structure could not be restored to an airworthy state as it exceeded the airframe certification design load limits during the upset encounter

https://aviation-safety.net/database...?id=20170107-0

http://reports.aviation-safety.net/2...MSC_PRELIM.pdf


All times are GMT +10. The time now is 01:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Sydney Airport Message Board 1997-2022