View Single Post
  #1  
Old 7th December 2022, 07:30 PM
MarkR MarkR is offline
Prolific Member
 
Join Date: Dec 2012
Posts: 2,074
Default ATC clears 737 to cross runway while A380 departs

Quote:
The Australian Transport Safety Bureau (ATSB) is investigating an air traffic control error that occurred at Sydney Airport on 14 November 2022, involving a taxiing Boeing 737 and an Airbus A380 aircraft, departing on runway 34L.

The Boeing 737 had recently landed on runway 25. When issuing the landing clearance, the aerodrome controller had provided the flight crew traffic information about the Airbus A380, lined-up but holding position on the threshold of the intersecting runway, 34L.

The Airbus A380 was issued a take-off clearance as the Boeing 737 crossed through the intersection of the runways. The Boeing 737 vacated runway 25 onto the taxiway and the flight crew contacted the surface movement controller, who issued clearance to cross runway 34L and taxi to their allocated parking bay.

The Boeing 737 crew were reported to have seen the Airbus A380 still on its take-off roll and queried the runway crossing clearance with the controller, who then issued an instruction to hold short of the runway.
https://www.atsb.gov.au/publications...rt/ao-2022-062
Reply With Quote