Sydney Airport Message Board Sydney Airport Message Board  

Go Back   Sydney Airport Message Board > Aviation Industry News and Discussion > International Industry


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 6th January 2024, 06:25 PM
MarkR MarkR is offline
Prolific Member
 
Join Date: Dec 2012
Posts: 2,225
Default Alaska Airlines 737-9 MAX exit door separates in flight

Quote:
The rear mid-cabin exit door assembly separated from an Alaska Airlines 737-9 MAX minutes after take off from Portland on 5 January. The aircraft, registration N704AL, departed Portland (PDX) bound for Ontario, CA (ONT) at 17:06 local time (01:06 UTC +1). The aircraft reached a maximum altitude of 16,325 feet AMSL. It diverted safely back to Portland, landing at 17:26, reaching the gate at 17:30. The flight was carrying 171 passengers and six crew.
https://www.flightradar24.com/blog/a...tes-in-flight/
Reply With Quote
  #2  
Old 7th January 2024, 07:49 AM
Greg Hyde Greg Hyde is offline
Prolific Member
 
Join Date: Sep 2008
Posts: 4,933
Default

US regulator investigates, grounds all Boeing 737-9 Max jetliners after Alaska Airlines blowout

US officials have ordered the immediate grounding of Boeing 737-9 Max jetliners after an Alaska Airlines plane suffered a blowout that left a gaping hole in the side of the fuselage.

Mandatory inspections will take about four to eight hours per aircraft and will affect about 171 airplanes worldwide.
Major US airline, United Airlines, said it will also temporarily suspend flights on about nine aircraft of the same model, leading to 60 cancellations on Saturday.

An Alaska Airlines jetliner blew out a window and a portion of its fuselage shortly after take-off almost five kilometres above Oregon late on Friday.
The incident created a gaping hole and forced pilots to make an emergency landing as its 174 passengers and six crew members donned oxygen masks.

No-one was seriously hurt as the depressurised plane returned safely to Portland International Airport about 20 minutes after it had departed.
The airline has since grounded its 65 Boeing 737-9 Max aircraft until they could be inspected.

https://www.abc.net.au/news/2024-01-...lines-blowout/
Reply With Quote
  #3  
Old 7th January 2024, 08:24 AM
Philip Argy's Avatar
Philip Argy Philip Argy is offline
Senior Member
 
Join Date: May 2008
Location: North Strathfield
Posts: 1,403
Exclamation Curious physics?

Ordinarily these things are designed so that air pressure holds them in place - even looking at the photos it is hard to figure out what has occurred but one plausible scenario is that the panel folded in on itself to be able to fit through the aperture. Obviously Boeing, NTSB etc are going to study this very carefully and it's why the FAA has grounded all Max-9s in case it's a latent design or material defect.
__________________
Philip
Reply With Quote
  #4  
Old 7th February 2024, 09:12 AM
Greg Hyde Greg Hyde is offline
Prolific Member
 
Join Date: Sep 2008
Posts: 4,933
Default

Door panel which flew off Boeing 737 MAX 9 jet missing four key bolts, NTSB report finds

A door panel that flew off a Boeing 737 MAX 9 jet mid-flight appeared to be missing four key bolts, according to an initial report by a US safety board investigating the incident.

Photo evidence released Tuesday shows bolts were missing from the door plug, which had been removed to fix rivets which were damaged in the production process, according to the independent US National Transportation Safety Board (NTSB) report.

Until now, the NTSB had not said what caused the panel to rip off an Alaska Airlines-operated jet as the plane climbed to 16,000 feet on January 5.

https://www.abc.net.au/news/2024-02-...olts/103435288

To quote Jamie Hyneman from the "Mythbusters" - "There's your problem"
Reply With Quote
  #5  
Old 7th February 2024, 10:04 AM
Philip Argy's Avatar
Philip Argy Philip Argy is offline
Senior Member
 
Join Date: May 2008
Location: North Strathfield
Posts: 1,403
Unhappy WTF?

It is staggering news if true and a sad indictment of how poor Boeing's QA systems must be, not to mention the issue of designing a plug that needs to be held in by bolts instead of being held in by air pressure.
__________________
Philip
Reply With Quote
  #6  
Old 7th February 2024, 11:29 AM
Greg Hyde Greg Hyde is offline
Prolific Member
 
Join Date: Sep 2008
Posts: 4,933
Default

Quote:
Originally Posted by Philip Argy View Post
It is staggering news if true and a sad indictment of how poor Boeing's QA systems must be, not to mention the issue of designing a plug that needs to be held in by bolts instead of being held in by air pressure.
True, Phil , cited by several news organisations.

Also, this mornings news:

Boeing Finds More Problems With 737 Max, Risking Delivery Delays

The plane manufacturer said incorrectly drilled holes were found in the fuselage of about 50 undelivered planes.
Reply With Quote
  #7  
Old 23rd February 2024, 10:00 AM
Greg Hyde Greg Hyde is offline
Prolific Member
 
Join Date: Sep 2008
Posts: 4,933
Default

Boeing ousts 737 MAX chief in shake-up as blowout fallout mounts

Boeing has ousted the leader of the 737 MAX program at its Renton plant and reshuffled its leadership team at the Commercial Airplanes division, effective immediately.

The moves come more than a month after a Renton-assembled MAX 9 saw a fuselage panel blow out of an Alaska Airlines flight departing Portland. Investigators contend key bolts were missing from the plane prior to the Jan. 5 blowout, a failure that has increased scrutiny of quality control at Boeing and its suppliers and put intense pressure on company leadership.

Ed Clark, vice president of the MAX program and general manager at the Renton facility, will leave the company. He’s being replaced by Katie Ringgold, the current vice president 737 delivery operations.

The changes were announced Wednesday morning in an email to employees by Boeing Commercial Airplanes chief Stan Deal.

https://www.seattletimes.com/busines...adership-team/

The deck-chairs on the Titanic have been reshuffled again !
Reply With Quote
  #8  
Old 27th February 2024, 11:04 PM
Brian Wilkes Brian Wilkes is offline
Member
 
Join Date: Mar 2008
Posts: 586
Default

Don't know if this will change anything or not, I think you have to look at workers and their workmanship and personal first.
__________________
_____________________________________

Regards
Brian Wilkes
Reply With Quote
  #9  
Old 28th February 2024, 02:13 PM
Greg Hyde Greg Hyde is offline
Prolific Member
 
Join Date: Sep 2008
Posts: 4,933
Default

There was a very good documentary on the "culture" of Boeing a while back.

It started to change from an "engineering" focused organisation about the time that Douglas was taken over.

The bottom-line (profit) became the driver.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 09:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Sydney Airport Message Board 1997-2022
Use of this web site constitutes acceptance of the Conditions of Use and Privacy Statement