Sydney Airport Message Board Sydney Airport Message Board  

Go Back   Sydney Airport Message Board > Spotting and Movements > Radar Spotting


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11th March 2018, 07:52 AM
Leigh R Leigh R is offline
Member
 
Join Date: Feb 2018
Location: The Rock
Posts: 14
Default ADSB TX Output power

Would anyone know what output power ADSB transmitters have for different size planes/craft?

Would anyone have photos of what the antennas look like that are used on the planes/craft?
Reply With Quote
  #2  
Old 12th March 2018, 04:42 PM
Robert.M Robert.M is offline
Member
 
Join Date: Aug 2014
Location: Wagga Wagga
Posts: 574
Default

Would be a lot of variables, type of aircraft, type of ADS-B transponder, the manufacturer, antenna used and where it's placed. Example is VH-KNS, which I could only pick-up once it was


http://www.ads-b.com/PDF/UAT%20SARP.pdf

https://www.google.com.au/search?q=a...w=1295&bih=655
__________________
Robert Myers Photography - Aviation Spotting Australia

Flightradar24 feeder (F-YSWG1 & T-YSWG2)
FlightAware feeder (YSWG/6482)
Reply With Quote
  #3  
Old 12th March 2018, 07:11 PM
Leigh R Leigh R is offline
Member
 
Join Date: Feb 2018
Location: The Rock
Posts: 14
Default

Robert,

Thank you for the info.

I plugged into Google after reading your info and found some info here -
https://www.hindawi.com/journals/ijno/2011/973656/
Not sure how accurate that is or where its from. But it would appear from your info and this, that small craft at low altitudes and speeds could be rather low powered yet the bigger planes could pack quite a hefty signal if the maximum limit is 500W. We could pressume that most larger planes would be TXing 100 to 125W as a minimum.

Quote -
"The ES ADS-B message is a 120 bit transmission that contains the aircraft identification, position, velocity, and status. The message is broadcast with a period that ranges randomly between 0.4 and 0.6 seconds. This randomization function is designed to prevent aircraft from having synchronized transmissions on the same frequency, and thus obscuring each other's transmissions. Required transmitter power for the ADS-B signal varies with the aircraft category. For smaller aircraft, a minimum transmission power of 75 W is specified while larger aircraft require a minimum power of 125 W or 200 W with a maximum output power for all classes of 500 W [6]. Any aircraft that is capable of operating at altitudes greater than 15,000 ft (4570 m) above sea level (ASL), or with cruising speeds above 175 kts (324 km/h), are required to transmit at 125 W as a minimum [6]. Aircraft use a quarter-wave monopole antenna for ADS-B transmissions that transmit vertically polarized signals [6].
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Sydney Airport Message Board 1997-2022
Use of this web site constitutes acceptance of the Conditions of Use and Privacy Statement