Sydney Airport Message Board Sydney Airport Message Board  

Go Back   Sydney Airport Message Board > Spotting and Movements > Radar Spotting
Register FAQ Calendar Today's Posts Search


Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 17th June 2017, 11:28 PM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

Setting up Planefinder for First time
  1. Open a browser window and go to http://<IP_Address>:30053 - so if the IP address of your Raspberry Pi according to Resin is 10.0.1.16 then go to http://10.0.1.16:30053
  2. If this is a new device, you will see:
  3. Same drill, just different. Fill out form and click "Generate a new sharecode"
  4. You will see a message: "The sharecode 5xxxxxxxxxxxxxx has now been authenticated"
  5. As per instructions above, insert this into your Resin variables using PF_SHARECODE = <The code above>
  6. You're done. Resin will automatically reboot your device and it will start using this ID.
Reply With Quote
  #12  
Old 17th June 2017, 11:41 PM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

Setting up Flightradar24 for First time
  1. Open up Resin
  2. Click on your device.
  3. Click on terminal.
  4. Run the following command:
    fr24feed --signup

  5. fr24feed --signup


  6. Answer the questions
  7. Take note of the key provided to you.
  8. As per instructions above, insert this into your device variables as FR24_KEY = <the key you were given>
  9. You're done, Resin will reboot your device and it's active.
Reply With Quote
  #13  
Old 17th June 2017, 11:53 PM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

Getting my Statistics

Once your are submitting these are the sites you can visit to view your statistics:

https://flightaware.com/ (click on My ADSB)
https://planefinder.net/sharing/account
https://www.flightradar24.com/account/data-sharing

Connecting to my Devices

Great thing about Resin is that even when you're not at home, you can still connect to the terminal of your devices, reboot them even turn on a flashing LED so that you know which device is which.

However when you are on the same network, the following work (example used 10.0.1.82 - just replace with your device's IP instead.

Flightaware - http://10.0.1.82:8080/dump1090-fa/
Planefinder - http://10.0.1.84:30053/
Flightradar24 - http://10.0.1.82:8754/
Reply With Quote
  #14  
Old 17th June 2017, 11:59 PM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

How do I update my software?
  1. Open up terminal or command prompt
  2. Refer to section "Getting my code....". Change into same directory you cloned my code from.
  3. When in the directory run the following command. If there is an error, then you're in wrong directory or maybe git related error.
    git pull
  4. If you get message "Already up-to-date" then my code is unchanged, however it does not mean that other software is not changed.
  5. Run the following command to completely rebuild all devices with the latest software:
    git push --force resin master

  6. Wait for the unicorn
  7. Check devices on Resin

How do I update my OS?
  1. Go to Resin.io
  2. Click on application
  3. Click on Download Resinos.
  4. Re-image your SD card using Etcher (see above).
  5. Done! Your Raspberry Pi will start and automatically install and configure applications. No extra work required

There is nothing further required. All variables can remain untouched. Resin will ensure that everything is pristine, unbroken. You could even delete non OS files, re-run the above commands and everything will be back to perfect.

Last edited by Glenn Stewart; 18th June 2017 at 12:08 AM.
Reply With Quote
  #15  
Old 18th June 2017, 12:05 AM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

What if everything is broken?

Ensure the following
  • Everything is connected correctly, powered on.
  • All the variables are correct as you know them to be.
  • Check "Device Summary" - this page will print out current statuses, and show obvious errors.
  • If the applications appear broken, then run procedure on "How do I update my software" to re-create the images.
  • If operating system appears broken, re-image from Resin.io using procedure under "How do I update my OS?" - just download, re-image.
  • Anything else broken, post it here.
Reply With Quote
  #16  
Old 18th June 2017, 12:12 AM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

Adding a new Device?
  1. Image as per "How do I update my OS?"
  2. Configure each new application as per the three "Setting up X for First time"
  3. Put in the required device specific variables - if it's in a new location, change GPS co-ordinates to suit and make that device variable.
  4. Done! Your device will install all software, configure itself and just work!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 10:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Sydney Airport Message Board 1997-2022
Use of this web site constitutes acceptance of the Conditions of Use and Privacy Statement